Bearing accepts either style: S 67 13 0 E or S 67°13'0" E.
Distance is in meters.
Ln
Bearing
Distance
Divide Equal Parts
Draw a closed lot in the "Bearing & Distance" tab first — Divide works on that lot.
Plot
Area
Custom Area
Draw a closed lot in the "Bearing & Distance" tab first — Custom Area works on that lot.
sq.m.
Enter one leg (the strip's width along the edge) — depth is solved exactly (Area = Leg × Depth).
Leg marks how far along the edge the cut starts; the depth beyond it is found by search to hit the exact area. Cuts sequentially - "Portion needed" pieces, each equal to the Desired area above (e.g. Desired area 1500, Portion needed 2 → two 1500 sq.m. pieces).
m
pcs
Plot
Area
Sketch
Enter bearing & distance lines, then Draw sketch.
Lines
—
Perimeter
—
Area
—
Disclaimer
All data entered or selected in this tool (bearings, distances, coordinates, boundaries) is supplied entirely by the user. This tool only performs computation based on that input — it does not verify field measurements, survey accuracy, or legal correctness.
Every output (areas, bearings, distances, coordinate lists, plotted boundaries) is for reference purposes ONLY and MUST be independently checked, verified, and signed/sealed by a duly licensed Geodetic Engineer before any official use, submission, or release.
The programmer/developer of this tool assumes NO responsibility or liability whatsoever for errors, omissions, misuse, incorrect input, or any consequence of relying on unverified output. Use of this tool constitutes full acceptance of this disclaimer.
For suggestions or corrections, please email: reyas@engineer.com
Traverse Sketch — Bearing & Distance Plot
Sketch only — for reference. Verify all bearings, distances, and areas against the actual field survey before use.